주메뉴
메인본문
PRODUCTS
GEMS HABIL(ENERGY) produces and Trading the following Oil products
|
Products/Trading 
|
Crude Oil 
|
GAS OIL 
|
|
Mazut M100 
|
Bitumen 
|
|
|
LNG 
|
LPG 
|
Russian Export Blend Crude Oil
REBCO(GOST 9965-76)
• Maximum Sulfur Content 1,8% Paraffin Content 6,0%
• Maximum Water & Sediment Content 1,2%
• Distillation, Weight 21%
• Up to 200° N min 21
• Up to 300° N min 41
• Up to 350° N min 50
• Maximum salts content, MG/L 100
Russian Mazut M100 (GOST 10585/75)
• Ash content not more 0.14%
• Mass fraction of sulphur ,not more % -low-sulphur-residual-oil 0.5
• Temperature of the flash,not less c in the closed crucible >65
• In the open crucible c 110min
• The temperature of solidification, not higher c 25
• Kinematics viscosity at 50 c 118max
• Water content 0.5%
• Mechanical impurities lower than 0.1%
• Acidity lower than 5mg koh/100ml
• Alkalinity nil
• Gross calorific value kcal/kg/kj/kg min 9200/41300
• Density at 15.0 deg c kg/l 0.890-0.9200
• Hydrogen sulfide content(h2s) pom 0.5max
• Carbon residua lower than 7%
• Vanadium(v) ppm 23
• Aluminium(al)ppm 5
• Silicon(si) ppm 12
• Nickel(ni)ppm 49
Russian D2 High Speed Oil (GOST 305-82)
COMPONENT |
UNIT | RESULT |
|
|---|---|---|---|
| MIN | MAX |
||
• Density@20°C |
Kg/m³ |
0.840 |
|
• Color |
2.0 |
||
• Flash Point PMCC |
°C |
57 |
62 |
• Kinematic Viscosity @ 20°C |
CST |
3.0 | 6.0 |
• Pour Point |
°C |
(*) |
-10.0 |
• Cloud Point |
°C |
(*) |
-5.0 |
• Mercaptan Sulphur |
0.01 |
||
• Acidity, mg/1000cm³ |
5 | ||
| • Iodine Number | g/100g |
6 | |
| • Ash | % wt |
0.01 | |
| • Total Sulphur | % wt |
0.02 |
0.03 |
| • Copper Corrosion(3hrs@50°C) | 1A | ||
| • CCR on 10% residues | % wt |
0.2 | |
• Cetane Index |
45 |
||
• 50% Recovered Volume |
°C |
280 | |
| • 90% Recovered Volume | °C |
360 |
|
• Bacteria MBC |
Fibre/lt |
500 |
|
| • Bacteria CFU | Fibre/lt |
1000 |
|
| • Summer from March to October | (PP - 5.0 °C ) |
||
| • Summer from March to October | (CP 0.0 °C) |
||
• Winter from November to February |
(PP - 10. °C) |
||
| • Winter from November to February | (CP - 5.0 °C) |
||
Russian BITUMEN
PENETRATION TEST 60/70 (AH-70) |
|
|---|---|
• Specific gravity@25/25 °C |
1.01 / 1.06 |
• Penetration @25 °C |
60 / 70 |
• Softening Point °C |
49 / 56 |
• Ductility @ 25°C |
100 Min. |
• Loss on heating WT % |
0.2 Max. |
• Drop in penetration after Heating % |
20 Max |
• Flash Point °C |
250Min. |
• Solubility in CS2 WT% |
99.5 Min. |
• Organic Matter Insoluble in CS2 WT % |
0.2 Max. |
• Spot Test |
Negative |
PENETRATION TEST 85/100 (AH-100) |
|
|---|---|
• Specific gravity@25 °C (100g.5s) 0.1mm |
80 / 100 |
• Penetration (AFTER RTFOT) % of original pen |
50Min |
• Softening Point (Ring and Ball) °C (NEAT) |
45 / 52 |
• Softening Point (AFTER RTFOT) °C |
45Min |
• Flash Point (Cleveland Open Cup) °C |
225Min. |
• Viscosity at 135 °C (AFTER RTFOT) CST |
Change/300% |
• Ductility at 25 °C cm |
100 Min |
• Ductility at 25 °C (AFTER RTFOT) cm |
75 Min |
• Specific Gravity at 25 °C g/cc |
1.00/1.05 |
• Thin Film Oven Test (TFOT) (5hr at 163 °C) % |
0.5 Max |
• Solubility in Trichloroethylene % |
99 Min. |
• Loss on Heating (5hrs. 163 °C) % Max |
0.5 Max |
• Penetration on residue(100g-5cs)% of initial pen mix |
80 Min |